WA Phone: (425) 740-3700 HI Phone: (808) 284-9042

Navigation:
Popular:
< Prev Next > Page 1 of 2
Current filter: Metal Type is Specialty Click here to show all 172 jobs
Joint Traffic Management Center Project:
Joint Traffic Management Center was designed by Architects Hawaii and built by Watts

Click image to enlarge.

Location: Honolulu, HI

Finish Year: 2019

Architect: Architects Hawaii

General: Watts

Seattle Opera Annex Project:
Seattle Opera Annex was designed by NBBJ and built by Lease Crutcher Lewis

Click image to enlarge.

Location: Mercer Street Seattle, WA

Finish Year: 2018

Architect: NBBJ

General: Lease Crutcher Lewis

NorthClad Designer Series panels set upon Kingspan Karrier and Morin N-12 panels help the new annex blend seamlessly with the Opera House

Ward Village Block M Project:
Ward Village Block M was designed by Bohlin Cywinski Jackson (BCJ) and built by Layton

Click image to see more.

Location: Honolulu, HI

Finish Year: 2018

Architect: Bohlin Cywinski Jackson (BCJ)

General: Layton

Northshore fabricated and installed this fabulously interesting 80,000 square foot parking screen and the specialty siding for Whole Foods

MItsuwa Marketplace Project:
MItsuwa Marketplace was designed by Nudell Architects and built by Nordic PCL

Click image to see more.

Location: Honolulu, HI

Finish Year: 2017

Architect: Nudell Architects

General: Nordic PCL

Fine Laser cut screen patterns and welded trim help make Mitsuwa Marketplace an attractive place to shop.

Dukes Lane Project:
Dukes Lane was designed by ADM and built by Swinerton

Click image to see more.

Location: Honolulu, HI

Finish Year: 2017

Architect: ADM

General: Swinerton

This project features some very fine finish work including aluminum panels with recessed or projecting reveals and some wire mesh shelving.

International Marketplace Project:
International Marketplace was designed by JPRA and built by DCK Pacific

Click image to see more.

Location: Honolulu, HI

Finish Year: 2016

Architect: JPRA

General: DCK Pacific

Perhaps the most beautiful mall in the world, the IMP features many architectural features built by NorthClad and installed by Northshore

Hawaii Regional Security Project:
Hawaii Regional Security was designed by  and built by Dck Pacific

Click image to enlarge.

Location: Honolulu, WA

Finish Year: 2010

General: Dck Pacific

We provided welded, curved aluminum fascia that went around a curve and other composite cladding. Great looking job if you are allowed to see it!

Port of Seattle Escalator Modernization Project:
Port of Seattle Escalator Modernization was designed by  and built by Turner

Click image to enlarge.

Location: Seatac Airport Seatac, WA

Finish Year: 2013

General: Turner

We fabricated and installed the tight stainless escalator cladding at SeaTac Airport, including the welded curved transitions

University of Hawaii Project:
University of Hawaii was designed by Ushijima Architects and built by Honolulu Builders

Click image to enlarge.

Location: 2465 Campus Road Honolulu, HI

Finish Year: 2014

Architect: Ushijima Architects

General: Honolulu Builders

We performed the fascia and a variety of sheet metal flashing on the Campus Renovation Project. Need Curves? Call us!

8th and Olive Project:
8th and Olive was designed by Mulvanny and built by JTM Construction

Click image to see more.

Location: 1635 8th Ave Seattle, WA

Finish Year: 2009

Architect: Mulvanny

General: JTM Construction

Wilsonian Canopy Project:
Wilsonian Canopy was designed by Ron Wright and built by Turner Construction

Click image to see more.

Location: 4710 University Way Seattle, WA

Finish Year: 2009

Architect: Ron Wright

General: Turner Construction

Masonic Lodge Project:
Masonic Lodge was designed by  and built by

Click image to see more.

Location: Seattle, WA

Finish Year: 2008

Your restoration deserves a craftsman's touch. We replicated this historic cornice with care, by hand and with the aid of computerized fabrication, for a very close match.

Pagliacci Pizza Project:
Pagliacci Pizza was designed by Mesher Shing and built by Wilcox Construction

Click image to enlarge.

Location: 6504 NE Bothell Way Kenmore, WA

Finish Year: 2005

Architect: Mesher Shing

General: Wilcox Construction

If you want curved roofing and flashing, give us a call. This building featured heavy, custom color fascia in order to minimize "oil-canning", and an AEP Select Seam roof.

S. South Residence Project:
S. South Residence was designed by KH Design and built by Edifice Construction

Click image to enlarge.

Location: Medina, WA

Finish Year: 2002

Architect: KH Design

General: Edifice Construction

We worked on several phases of this unique residence. We performed the custom. curved siding on the tower and siding and curved roofing on the guest house.

Frye Art Museum Project:
Frye Art Museum was designed by Olson Sundberg and built by Skanska Construction

Click image to enlarge.

Location: 704 Terry Avenue Seattle, WA

Finish Year: 1996

Architect: Olson Sundberg

General: Skanska Construction

Go inside to check out the dome ceiling of perforated metal. Outside, see a great combination of lines and shadows in the metal siding.

Evergreen Seminar II Project:
Evergreen Seminar II was designed by Mahlum and built by DPR Construction

Click image to enlarge.

Location: 2700 Evergreen Parkway N. W. Olympia, WA

Finish Year: 2004

Architect: Mahlum

General: DPR Construction

Stainless steel flashing and metal siding top off these buildings at Evergreen College.

Bnai Brith Hillel Foundation Project:
Bnai Brith Hillel Foundation was designed by Miller Hull and built by GLY Construction

Click image to enlarge.

Location: 4745 17th Ave NE Seattle, WA

Finish Year: 2004

Architect: Miller Hull

General: GLY Construction

Issaquah Bank Expansion Project:
Issaquah Bank Expansion was designed by Baylis and built by Bayley Construction

Click image to enlarge.

Location: 1055 NW Maple St. Issaquah, WA

Finish Year: 2003

Architect: Baylis

General: Bayley Construction

Nice flashing.

VA Hospital Building 81 Pharmacy Project:
VA Hospital Building 81 Pharmacy was designed by Pacific and built by Lease Crutcher Lewis Construction

Click image to enlarge.

Location: 9600 Veteran\'s Drive Lakewood, WA

Finish Year: 2003

Architect: Pacific

General: Lease Crutcher Lewis Construction

This historical building was reroofed with some new copper detailing. Some of the existing work remained in order to be fiscally responsible. Copper lasts a long time.

Sandpoint Bldg 5 Project:
Sandpoint Bldg 5 was designed by Bumgardner and built by PCT Construction

Click image to enlarge.

Location: 7400 Sandpoint Way Seattle, WA

Finish Year: 2003

Architect: Bumgardner

General: PCT Construction

Copper, stainless and prefinished metal were required on the reroof of this historic building.

Eastlake Mixed Use Project:
Eastlake Mixed Use was designed by Weber Thompson and built by Chinn Construction

Click image to enlarge.

Location: 3217 Eastlake Ave E Seattle, WA

Finish Year: 2003

Architect: Weber Thompson

General: Chinn Construction

High quality flashing.

Redmond Town Center Parcel 18A Project:
Redmond Town Center Parcel 18A was designed by Studio Meng Strazzara and built by Howard S Wright Construction

Click image to enlarge.

Location: 16495 NE 74th St Redmond, WA

Finish Year: 2002

Architect: Studio Meng Strazzara

General: Howard S Wright Construction

Our flashing completes the look.

First Impressions Project:
First Impressions was designed by Bassetti and built by Rushforth Construction

Click image to enlarge.

Location: 915 Second Ave. Seattle, WA

Finish Year: 2002

Architect: Bassetti

General: Rushforth Construction

Seattle Aquarium Project:
Seattle Aquarium was designed by Buffalo Design and built by Porter Brothers Construction

Click image to enlarge.

Location: 1421 Alaska Way Seattle, WA

Finish Year: 1998

Architect: Buffalo Design

General: Porter Brothers Construction

The copper fish gutter hangers are functional art. See us if you have a cool metal idea like this. We can get it done.

Sound Transit Light Rail Project:
Sound Transit Light Rail was designed by Sound Transit and built by Kiewit Construction

Click image to enlarge.

Location: 2901 Airport Way S Seattle, WA

Finish Year: 2006

Architect: Sound Transit

General: Kiewit Construction

Peter G Schmidt Elementary Project:
Peter G Schmidt Elementary was designed by BJSS Duarte Bryant and built by Berschauer Phillips Construction

Click image to enlarge.

Location: 6600 Capitol Blvd Tumwater, WA

Finish Year: 2005

Architect: BJSS Duarte Bryant

General: Berschauer Phillips Construction

Our flashing accents the new roofing on this Tumwater school.

Harvard Estates Project:
Harvard Estates was designed by Studio Meng Strazzara and built by GLY Construction

Click image to enlarge.

Location: 723 Harvard Ave E Seattle, WA

Finish Year: 2005

Architect: Studio Meng Strazzara

General: GLY Construction

These high end condos feature our quality gutter and flashing.

Overlake School Math and Science Project:
Overlake School Math and Science was designed by Bassetti and built by Snyder Roofing

Click image to enlarge.

Location: 20301 NE 108th St. Redmond, WA

Finish Year: 2004

Architect: Bassetti

General: Snyder Roofing

This features our large industrial gutter and expert flashing.

Overlake School PE and Athletic Building Project:
Overlake School PE and Athletic Building was designed by Bassetti and built by Foushee Construction

Click image to enlarge.

Location: 20301 NE 108th St Redmond, WA

Finish Year: 2004

Architect: Bassetti

General: Foushee Construction

This features our large industrial gutter and expert flashing.

Qwest Auburn Project:
Qwest Auburn was designed by KDW and built by GLY Construction

Click image to enlarge.

Location: 10 Second St. Auburn, WA

Finish Year: 2004

Architect: KDW

General: GLY Construction

Barely visible over that brick wall is an interesting woven metal screen wall we installed.

Autozone 1171 Project:
Autozone 1171 was designed by  and built by Pennon Construction

Click image to enlarge.

Location: 14123 Meridian E Puyallup, WA

Finish Year: 2004

General: Pennon Construction

Kynar coping and flashing form clean lines.

VA Puget Sound Health Care 61 Project:
VA Puget Sound Health Care 61 was designed by Anshen Allen Pacific and built by MJ Takisaki Construction

Click image to enlarge.

Location: 1660 South Columbia Way Seattle, WA

Finish Year: 2004

Architect: Anshen Allen Pacific

General: MJ Takisaki Construction

We performed flashing to accomodate some remodeling at the hospital.

Current filter: Metal Type is Specialty Click here to show all 172 jobs
©2020 Northshore Exteriors Inc.
Close X
Loading...